Call 1-866-225-8064 | Chat with a Training Advisor

eLearning Cisco Certification Training Video Library

Year Subscription

$399.00

Monthly Payments (1 year)

$39.00

Get Immediate Access to 40 eLearning Videos Today!
IPexpert will have 50- 100 videos added each month.

About IPexpert's eLearning Cisco Certification Training Video Library

IPexpert is pleased to announce its eLearning Cisco Video Library. Our Video Library, which is based on Cisco technologies and protocols, is an extensive collection of topic-focused streaming tutorials which cover every technology within the scope of Cisco's CCNA (R&S, Voice, Security and Wireless), CCNP (R&S, Voice, Security and Wireless), CCIE Written (R&S, Voice, Security and Wireless) and CCIE Lab (R&S, Voice, Security and Wireless). There are also many more topics and technologies that are included which are currently not on any of the Cisco exams or labs.

Access to Videos

Upon ordering, you will instantly have access to all available videos via IPexpert's online streaming system. Our library, the most comprehensive Cisco-focused video library in the industry, is an on-going and never-ending technical resource in which we will continue to add additional videos on various topics and technologies on a weekly basis. Students also have the ability to request a specific topic if we haven't covered it yet, and within a timely manner your requested video will be created by one of IPexpert's world-renowned instructors and added to the library.

Get Immediate Access to 40 eLearning Videos Today!
Videos in Details Section in Bold Font and Marked with * are Available Now

Why Choose IPexpert
CCIE R&S Topics
CCIE Voice Topics
CCIE Wireless Topics
CCIE Security Topics
CCNP R&S Topics
CCNP Voice Topics
CCNP Wireless Topics
CCNP Security Topics
CCNA R&S Topics
CCNA Voice Topics
CCNA Wireless Topics
CCNA Security Topics

Why Choose IPexpert

One may expect to pay upwards of $5,000 to $8,000 dollars, but IPexpert's eLearning Cisco Video Library is pleasantly priced at $499 for a 12-month streaming membership, or $49.99 a month, which can be cancelled at any time. IPexpert Blended Learning Solution owners, and students of IPexpert's Online Learning Subscription will receive access to the entire library for a period of 12 months, free of charge!

CCIE R&S Topics

Videos in Bold Font and Marked with * are Available Now

Implementing Layer 2 Technologies - Configuring and Troubleshooting Layer 2 Technologies
Frame Relay
Frame Relay Switching
Frame Relay Switching - LMI Settings
Frame Relay Multipoint Links on a Physical Interface Using Inverse ARP
Frame Relay Multipoint Links on a Physical Interface Without Using Inverse ARP
Frame Relay Multipoint Link on a Subinterface Using Inverse ARP
Frame Relay Multipoint Link on a Subinterface Without Using Inverse ARP
Frame Relay Point-to-Point Subinterfaces
PVC with a Multipoint Interface on One Side and a Subinterface on the Other Side
Authentication on a Frame Relay Link Using PPP
Catalyst Configuration
Trunks Using an Industry-Standard Encapsulation
Trunks Using a Cisco Proprietary Encapsulation
Creating, Deleting, and Editing VLANs
VTP in Client/Server Mode
VTP in Transparent Mode
VTP Authentication
VTP Pruning
Controlling VLANs That Cross a Trunk
Optimizing STP by STP Timers
PortFast
Loop Guard
BPDU Guard
BPDU Filters
UplinkFast
BackboneFast
MSTP
Selecting the Root Bridge for VLANs in a PVST Environment
Selecting the Root Bridge for an MST Instance in an MST Environment
Setting the Port Priority to Designate the Forwarding Ports
EtherChannel Using an Industry-Standard Protocol
EtherChannel Using a Cisco Proprietary Protocol
Disabling Protocols on the EtherChannel
Load-Balancing Type on the EtherChannel
SNMP Management on the Switch
Telnet and SSH Management on the Switch
Controlling Inbound and Outbound Telnet on the Switch
Regular and Smart Macros
Switch Banners
UDLD
Switch Virtual Interfaces (SVIs) for IP Routing
Router on a Stick
SPAN
RSPAN
IP Routing on the Switch Using RIPv2, EIGRP, OSPF, and BGP
IP Phones to Connect to the Catalyst Switch
Dot1q Tunneling
Layer 2 Protocol Tunneling
Other Layer 2 Technologies
HDLC
PPP
PPP Authentication
PPP Authentication Using PAP
PPP Authentication Using CHAP Variants
PPP Authentication Using EAP
PPP over Ethernet
PPP over Ethernet and IPCP
PPP over Ethernet and DHCP
Implementing IPv4 - Configuring and Troubleshooting IPv4
IPv4 Addressing
IPv4 Addressing
IPv4 Subnetting
IPv4 VLSM
OSPFv2
Basic OSPF
OSPF Metrics and Best-Path Calculations
Passive Interfaces
OSPF on a Broadcast Multicast Access Network (Ethernet)
OSPF over a Frame Relay Multipoint Network by Changing Network Types
OSPF over a Frame Relay Multipoint Network by Using the neighbor Command
OSPF over a Frame Relay Point-to-Point Network
Virtual Links
Transit Area Capability
Stub Areas
Totally Stubby Areas
NSSA Areas
NSSA and Stub Areas
NSSA and Totally Stubby Areas
EIGRP
Basic EIGRP
EIGRP Metrics and Best-Path Calculations
Passive Interfaces
EIGRP Stub on Routers and Switches
EIGRP Update-Bandwidth Control
Changing the Administrative Distance of EIGRP
Equal-Cost Load Sharing for EIGRP
EIGRP Traffic Engineering (Metric Manipulation)
Unequal-Cost Load Balancing for EIGRP
Filtering, Redistribution, and Summarization
Route Filtering for OSPF Within the Area Using a Distribute List with an ACL and Prefix Lists
Route Filtering for OSPF Between Areas
Summarization of OSPF Routes Between Areas
Summarization of External Routes Within OSPF
Filtering with a Distribute List Using an ACL and Prefix Lists
Using Advanced ACLs and a Prefix List for Filtering Routes
Summarizing Routes with EIGRP
Route Summarization for RIP
Redistribution Between OSPF and EIGRP
Redistribution Between RIP and EIGRP
Redistribution Between RIP and OSPF
Redistribution of Directly Connected Routes
Redistribution of Static Routes
Redistribution with Filtering Using ACLs and Prefix Lists
Redistribution with Filtering Using Route Tagging
IBGP
IBGP Peering
Advertising Routes in BGP
Next-Hop Attribute
Route Reflectors
Redundancy by Neighbor Relationships Based on Loopbacks
EBGP
EBGP Peering
EBGP Peering Based on Loopbacks
BGP Advanced Features
BGP Load Sharing
BGP Load Sharing Based on Link Bandwidth
Filtering Using ACLs
Filtering Using Prefix Lists
Filtering Using AS Path Filters
Redistributing Connected Routes into BGP
Redistributing Dynamic Routing Protocols into BGP
BGP Aggregation
BGP Aggregation with the Summary Only Parameter
BGP Aggregation with Suppress Maps
BGP Aggregation with Unsuppress Maps
BGP Best-Path Selection - Weight
BGP Best-Path Selection - Local Preference
BGP Best-Path Selection - MED
BGP Communities - No-Export
BGP Communities - Local-AS
BGP Communities - No-Advertise
BGP Confederation
BGP Local AS
Working with Private AS Numbers
BGP Route Dampening
Conditional Advertising
Peer Groups
BGP Templates
Performance Routing (PfR) and Cisco Optimized Edge Routing (OER)
Implementing IPv6 - Configuring and Troubleshooting IPv6
IPv6
IPv6 Addresses
IPv6 Neighbor Discovery
IPv6 Router Advertisement
IPv6 Autoconfiguration
RIPng
OSPFv3
EIGRPv6
BGP for IPv6
IPv6 Tunneling
IPv6 IPv6IP Tunnels
IPv6 6to4 Relay Tunnels
IPv6 ISATAP Tunnels
IPv6 GRE Tunnels
IPv6 on a Frame Relay Network - Multipoint
IPv6 on a Frame Relay Network - Point-to-Point
Route Filtering with a Distribute List Using an ACL and Prefix Lists
Route Redistribution Between OSPFv3 and EIGRPv6
Route Redistribution Between OSPFv3 and RIPng
Route Redistribution Between EIGRPv6 and RIPng
Implementing MPLS - Configuring and Troubleshooting MPLS
MPLS Unicast Routing
MPLS Unicast Routing Using LDP
MPLS LDP Authentication
MPLS Unicast Routing Using TDP
MPLS LDP and TDP Redundancy
Controlling Label Distribution
MPLS VPN
MPLS VPN Using Static Routing Between PE-CE
MPLS VPN Using EIGRP as the PE-CE Routing Protocol
MPLS VPN Using EIGRP as the PE-CE Routing Protocol - Advanced
MPLS VPN Using OSPF as the PE-CE Routing Protocol
MPLS VPN Using OSPF as the PE-CE Routing Protocol - Advanced
MPLS VPN Using EBGP as the PE-CE Routing Protocol
MPLS VPN Using EBGP as the PE-CE Routing Protocol - Advanced
Controlling Route Propagation Using the Route Target with Import and Export Maps
VRF-Lite
VRFs at the Customer Sites Using VRF-Lite
VRF-Lite and OSPF
Implementing IP Multicast - Configuring and Troubleshooting IP Multicast
PIM and Bidirectional PIM
PIM Dense Mode
PIM on an NMBA Network
PIM Sparse Mode - Static Rendezvous Point
PIM Sparse Mode - Multiple Static Rendezvous Points
PIM Sparse Mode - Auto Rendezvous Point
PIM Sparse Mode - Bootstrap Router
PIM Sparse Mode with Multiple Rendezvous Points Using the Auto Rendezvous Point
PIM Sparse Mode with Multiple Rendezvous Points Using the Bootstrap Router
Bidirectional PIM
MSDP
MSDP
MSDP to an Anycast Rendezvous Point
Multicast Tools
Multicast Rate Limiting
IGMP Filtering on the Switch
Use of the Switch to Block Multicast Traffic
Multicasting Through a GRE Tunnel
Multicast Helper Address
Multicast BGP
IPv6 Multicast
IPv6 Multicast Routing Using PIM
IPv6 Multicast Routing and Bootstrap Router
IPv6 Multicast Routing and the Embedded RP
IPv6 Multicast Listener Discovery (MLD) Protocol
Implementing Network Security - Configuring and Troubleshooting Network Security
AAA and Security Server Protocols
Use of a Router to Authenticate Against a AAA Server Using TACACS+
Use of a Router to Authenticate Against a AAA Server Using RADIUS
Local Privilege Authorization
Accounting to a AAA Server Using TACACS+
Accounting to a AAA Server Using RADIUS
Router as a RADIUS Server
Access Lists
Standard Access Lists
Extended Access Lists
Time-Based Access Lists
Reflexive Access Lists
Routing Protocol Security
Routing Protocol Authentication for RIPv2
Routing Protocol Authentication for EIGRP
Routing Protocol Authentication for OSPF - Authentication Model and Types
Routing Protocol Authentication for OSPF - Area-Wide
Routing Protocol Authentication for OSPF - Interface-Specific
Routing Protocol Authentication for OSPF Virtual Links
Routing Protocol Authentication for BGP
Catalyst Security
Storm Control
Switch Port Security
Dot1x Authentication
Dot1x Authentication for VLAN Assignment
VLAN Access Maps
DHCP Snooping
DAI
IP Source Guard
Private VLANs
Private VLANs - Isolated
Private VLANs - Community
Cisco IOS and Zone-Based Firewalls
Basic Cisco IOS Firewall
DoS Protection on a Cisco IOS Firewall
Basic Zone-Based Firewall
Zone-Based Firewall with Deep Packet Inspection
Control Plane Protection
NAT
Dynamic NAT
PAT
Static NAT
Static PAT
Policy-Based NAT
Using NAT With Routing Protocols
Other Security Features
Configuring the TCP Intercept Feature
Configuring Blocking of Fragment Attacks
Configuring Switch Security Features
Configuring Antispoofing Using an ACL
Configuring Antispoofing Using uRPF
SSH on Routers and Switches
Cisco IOS IPS
Controlling Telnet and SSH Access to the Router and Switch
Implementing Network Services - Configuring and Troubleshooting Network Services
DHCP
Configuring DHCP on a Cisco IOS Router
Configuring DHCP on a Switch
Using a Router and a Switch to Act as a DHCP Relay Agent (Helper Address)
HSRP
HSRP Between Two Routers*
Pre-empt for HSRP*
Authentication for HSRP*
VRRP
Pre-empt for VRRP*
Authentication for VRRP*
GLBP
Authentication for GLBP*
Load-Sharing and Balancing for GLBP*
IP Services
Use of the Router for WCCP
Use of the Router to Generate an Exception Dump Using TFTP
Use of the Router to Generate an Exception Dump Using FTP
Use of the Router to Generate an Exception Dump Using RCP
Broadcast Forwarding for Protocols
System Management
Telnet Management on the Router and Switch
SSH Management on the Router and Switch
Disabling Telnet and the SSH Client on the Switch*
HTTP Management on the Router and Switch
Controlling HTTP Management on the Router and Switch
NTP
NTP Using the NTP Master and NTP Server Commands
NTP Without Using the NTP Server
NTP Using NTP Broadcast Commands
NTP Using NTP Multicast Commands
Implementing QoS - Configuring and Troubleshooting QoS
Classification
Marking Using DSCP
Marking Using IP Precedence
Marking Using CoS
Congestion Management and Congestion Avoidance
Priority Queuing
Custom Queuing
Weighted Fair Queuing
Hierarchical Queueing Framework (HQF)
WRED
RSVP
Policing and Shaping
CAR Using Rate Limiting Under the Interface
Frame Relay Traffic Shaping Using Map Classes
Discard Eligible List Using MQC*
Link Efficiency Mechanisms
Compression
Link Fragmentation and Interleaving (LFI) for Frame Relay
Modular QoS CLI
Policing
Class-Based Weighted Fair Queuing (CB-WFQ)
Low Latency Queuing (LLQ)
Shaping Using MQC
Policing Using MQC
Random Early Detection Using MQC
WRED Using MQC
Using NBAR for QoS
Discard Eligible Marking Using MQC
Hierarchical QoS Policies
AutoQoS
AutoQoS for Voice
AutoQoS for Enterprise
Catalyst QoS
Classification and Marking on the Catalyst Switch
SRR on the Catalyst Switch
Policing on the Catalyst Switch
Shaping on the Catalyst Switch
Aggregate Policer on the Catalyst Switch
AutoQoS on the Catalyst Switch
Troubleshooting a Network - Troubleshooting Network-Wide Connectivity Issues
Troubleshooting Layer 2 Problems
Troubleshooting Catalyst Switch Network Issues
Troubleshooting Frame Relay Network Issues
Troubleshooting Layer 3 Problems
Troubleshooting IP Addressing Network Issues
Troubleshooting Routing Protocol Network Issues
Troubleshooting Routing Protocol Loop Issues
Troubleshooting Application Problems
Determining Which Aspects of the Network to Troubleshoot to Determine Network Functionality
Troubleshooting Network Services
Troubleshooting Misconfigured NTP Setup
Troubleshooting Misconfigured DHCP Setup
Troubleshooting Misconfigured Telnet and SSH Setup
Troubleshooting Misconfigured SNMP Setup
Troubleshooting Security Services
Troubleshooting Misconfigured ACLs
Troubleshooting Misconfigured NAT
Troubleshooting Misconfigured AAA Services
Optimizing a Network - Configuring and Troubleshooting Optimization of a Network
Logging In
Logging into a Remote Syslog Server
Logging into the Internal Buffer
SNMP
Use of a Router to Communicate to an SNMP Management Station
Use of a Router to Generate SNMP Traps
SNMP Views
SNMPv3 on Routers and Switches
RMON
Use of a Router to Generate SNMP Traps Using RMON
Accounting
IP Accounting
SLA
IP SLA*
Implementing Network Services on the Routers
Use of a Router as an FTP Server
Use of a Router as a TFTP Server*
Cisco IOS Embedded Event Manager
NetFlow
HTTP and HTTPS on a Router
Telnet on a Router*
Implementing Secure Copy Protocol (SCP) on a Router*

CCIE Voice Topics

Videos in Bold Font and Marked with * are Available Now

Boolean Logic*
Call Hold Unhold Step*
CET Tool*
Configuring Agents*
Container Prompt*
Creating and Debugging Applications*
Get Digit String*
Get Reporting Statistic*
Get User Step*
Goto and Label*
Integrating UCCX with CUCM*
IP Phone Agent*
Menu Step*
Play Prompt Step*
Recording and Uploading Prompts*
RmCm*
Scripting 101*
Select Resource Step*
Time of Day Routing*
Binding Media and Control to Specific IP Address*
Class of Restriction*
Cisco Discovery Protocol*
802.1g Trunks*
Switch Virtual Interfaces*
Spanning Tree Portfaces*
Link Layer Discovery Protocol*
IOS DHCP Automatic*
IOS DHCP Server Manual*
VLAN*
CUCM N TP*
VTP*
Changing Phone Background Images*
Campus Infrastructure and Services
CDP
LLDP
UCM Service Activation
UCM DHCP
TFTP
BOOTP
IOS NTP
UCM NTP
CUCM Endpoints
UCM Groups
Database Replication
Enterprise Parameters
SCCP Phone registration
SIP Phone registration
SIP Profiles
SIP Dial Rules
Date/Time Group Configuration
Regions and Codec
Locations CAC
Calling Search Space and Partitions
Device / Line Approach to CSS
Time Of Day Partitions
External Number Mask
Display and Alerting name
Line Text Labels
Common Device Configuration
Modifying Phone Buttons
Modifying Softkeys
Phone Service Provisioning
Phone Hardening
Auto Answer
Call Forwarding
Busy Trigger
Forwarded Call Information Display
Using the handset for verification
End Users
Application Users and AXL
LDAP Synchronization
RingLists
BackGround Images
TFTP File Management
CUCME Endpoints
Registering a SCCP Phone to CME
SCCP Phones as EFXS Ports
NTP, Date and Time settings for SCCP Phones
Setting up the CME GUI
Octo-line
Busy Trigger and Huntstop
Overlaid DN
Shared Lines
Registering a SIP Phone to CME
SIP Digest Authentication
SIP Phones as VOIP dial-peers
NTP, Date and Time settings for SIP Phones
KPML and SIP Dial Plan
Modifying Templates
COR
After Hours Blocking
Strict Matching
Blocking phones from registering
Background Images
Gateways
Introduction to gateways
Setting up an T1/E1 PRI
Clocking
POTS Dial Peers
VOIP Dial Peers
Dial Peer- longest matching
Direct inward Dial and Two Stage Dialing
Commonly changed ISDN timers
Voice Translation-profiles
Number Expansion
UCM H323 gateways
UCM MGCP gateways
UCM SIP Gateways
Binding Control and Media signaling to a specific IP Address
SDI Traces in UCM
UCM Call Routing
Route Patterns, Route List, Route Group
Standard Local Route Group
Urgent Priority
Hunt Pilot, Hunt List, Line Group
DNIS Manipulationat the Route Pattern
DNIS Manipulation at the Route List-Route Group
Calling Phone Display
Caller ID
Building Classes of Service
FACs and CMCs
Backup Route Group
Tail End Hopoff
Differences between H323 and MGCP gateways when building the dial plan
Localization & Globalization-offnet
Calling Party Transformation Patterns
+ dialing- offnet
Called Party Transformation Patterns
Localization & Globalization-onnet using Translation Patterns
+ dialing- onnet
Mobile Connect/Single Number Reach
Mobile Voice Access
Device Mobility/Roaming
Gatekeeper
Introduction to Gatekeeper
Local zones
Registering UCM to gatekeeper
Registering CME to gatekeeper
Gatekeeper Bandwidth CAC
Other types of gatekeeper CAC
Understanding Zone and Technology Prefix
Rejecting unknown prefixes
Default Technology
Gatekeeper Hopoff
Gatekeeper Aliases
Remote Zones
Directory Gatekeeper
Gatekeeper Bandwidth Requests
Introduction to CUBE and Via zones
Using the CUBE between local zones
Using the CUBE between remote zones
Troubleshooting remote gatekeeper issues
Troubleshooting remote gateway issues
H245 Capabilities Exchange/TCS
Media Flow-Through and Flow-Around
FastStart/SlowStart
Gatekeeper Redundancy
SIP Trunks
Digest Authentication
SIP Delayed Offer
SIP Early Offer
SIP Trunking using a CUBE
SIP Header Modification
Diversion Header
UDP versus TCP
Media Resources
Media Resource Group Management
DTMF
MTP
RSVP Call Agent/RSVP CAC
Conference Bridge and UCM
Ad-hoc conferencing and UCM
Meet-me conferencing and UCM
Conference Bridge and CME
Ad-hoc conferencing and CME
Meet-me conferencing and CME
Transcoderand UCM
Transcoder and CME
Transcoder and CUBE
DSP Calculations for maximizing usage of media resources
Music-on-hold from UCM server
Network Hold
User Hold
Adding a MOH source
Multicast MOH
Music-on-hold from SRST gateway
MOH on CME
Annunciator
Real Time Monitoring – using RTMT to monitor media resources
UCM CLI- using the CLI for verification
Unity Connection
Unity Connection overview
UCM Integration with CUC using SCCP
UCM Integration with CUC using SIP
CME Integration with CUC using SCCP
User Templates
Schedules
Importing Users
Call Routing Rules
Playback message settings
Phone Menu
Greeting rules
Transfer Rules
Custom Keypad Mapping
Alternate Extensions
Distribution Lists
Call Handlers
Caller Input options
Automated Attendant
Greetings Administrator
Broadcast messages
Phoneview
Live Record
MWI Issues- UCM Integration
MWI Issues- CME Integration
Using RTMT for Troubleshooting
Using Remote Connection Monitor Status for troubleshooting
Unity Express
Service-Engine configuration and nuances
Restoring Factory Defaults
Upgrading License files
CME Integration with CUE
Transcoding and CUE
UCM Integration with CUE
Importing Users
Greetings Management System
Broadcast Messages
General Delivery Mailbox
Voiceview Express
Live Record
MWI Issues- CME Integration
MWI Issues- UCM Integration
AutoAttendant
VPIM Integration between UCM and CME
High Availability Features
SRST using call-manager-fallback
SRST using unified CME
MGCP Fallback
Call Forward Unregistered (CFUR)
AAR
Preserving Conferencing in SRST
Feature Preservation in SRST
Building a Dialplan for SRST
Preserving Class of Restrictions in SRST
BACD and Huntgroups
Preserving Unity Connection Voicemail - SRST
Preserving Unity Connection Voicemail – AAR
Preserving Unity Express Voicemail - SRST
Preserving Unity Express Voicemail - AAR
Features and Services- UCM
IDivert
Intercom
Call Park
Directed Call Park
Pickup
Group Pickup
Other Pickup
Auto-answer Pickup
BLF Speed Dial & Pickup
Barge
cBarge
Callback
Do Not Disturb
Call Transfer Restrictions
Hold Reversion Timeout
Extension Mobility
IPMA- Proxy Line mode
IPMA- Shared Line mode
QoS
Catalyst 3750 Classification and Marking
Catalyst 3750 Input Queuing
Catalyst 3750- Input Queue WTD
Catalyst 3750- Input Queue SRR
Catalyst 3750- Output Queueing
Catalyst 3750- Output Queue WTD
Catalyst 3750- Output Queue SRR and PQ
LLQ
FRF.12 LFI
MLP LFI
cRTP
Class-based shaping
Class-based marking
FR VATS
Unified Contact Center Express
Base Integration
Setting CCX to Fresh Install when password is forgotten
Checking Existing Integration
Common UCCX Integration Problems
RMCM Subsystem- Skills Based Routing
RMCM Subsystem- Resource Group Based Routing
RMCM Subsystem- Agent Based Routing
One Button Login
IPPA
Basic Script Overview
Play Prompt step
Menu Step
Goto/Label Step
Boolean Expressions- If step
Call Hold/Delay/Call Unhold Steps
Time of Day Routing
Routing on ANI- Get Call Contact Info Step
Select Resource Step
Get User/Get User Info Steps
Recording and uploading prompts
Creating Container Prompts
Get Reporting Statistic Step
Get Digit String Step
Unified Presence
BLF Speed Dials in UCM
BLF Speed Dials in CME- SCCP
BLF Speed Dials in CME- SIP
Watch Mode in CME
Monitor Mode in CME
Presence Groups
Call List BLF- UCM
Call List BLF- CME
BLF Speed Dials between UCM and CME
CUP Server Integration with UCM
CUPC Registration- Deskphone mode
CUPC Registration- Softphone mode
Adding Contacts
Phone Presence- Line Association
IM Presence
IPPM
Boradcast Messages

CCIE Wireless Topics

Videos in Bold Font and Marked with * are Available Now

Configuring and troubleshooting discovery mechanisms
Configuring and Troubleshooting network services
NTP
SYSLOG
DHCP
DNS
Configuring and Troubleshooting Interface settings
Configuring and Troubleshooting unified AP
dot1x
locally significant certificates
office extend
AP Modes
AP Authentication / authorization
High availability
Logging
local / global configuration
Configuring and Troubleshooting AP groups
Configuring and Troubleshooting WLANs
client exclusion
load-balancing
band select
passive clients
DHCP policies
multicast VLAN
radio policies
Configuring and troubleshooting HREAP
local auth
h-reap groups
h-reap local switching
address learning
Configuring and troubleshooting Radio Settings
client link
power
channel settings
antenna selection
beaconing
data rates
channel bonding
Cleanair
EDDRRM
Interferer detection
air qualilty
Implement RRM/ AutoRF
country selection
CHD, DCA, TPC
RF groups
profiles
Implement Local DHCP services for clients
Configuring and troubleshooting Security settings
L2 security policies (802.11i, static dynamic WEP, mac filtering, etc..)
AAA (WLC to Radius/LDAP)
local EAP authentication (against local user list, and external LDAP)
peer to peer blocking
L3 security policies (Webauth, pass-through)
WPS settings (IDS...)
ACL Interface/CPU/WLAN
NAC
MFP
Configuring and troubleshooting mobility
L2/L3 roaming
multicast optimization
mobilty group scaling
Configuring and troubleshooting controller redundancy/fallback (APs and clients)
Configuring and troubleshooting Guest
wired
wireless
Configuring and troubleshooting multicast
Configuring and troubleshooting QOS
BW profile metal
EDCA
BW restrictions
per user BW roles
Configuring and troubleshooting Mesh
AP authorization
BGN
Ethernet bridging
serial backhaul
5
Configure and Troubleshoot WCS
Configure and troubleshoot management access
AAA
virtual domain
Configure and troubleshoot NTP
Perform basic Operations
Create and deploy templates, template groups
Create a floor coverage proposal
Prepare the building/floor map
Implement controllers to WCS
high availability
AP placement
Mesh monitoring
voice audits and location readiness
Performing maintenance operations
backup / restore
client troubleshooting
(c) AP conversion
(d) logging
5.05
Security management
(a) audit configuration
(b) Rogue Detection, classification and management
(c) Alerts
(d) Alarms and Events
(e) security index
(f) IDS / WIPS
(g) Service Levels
5.06
RF Management
(a) RRM events
(b) Cleanair
5.07
Implement MSE
(a) Configuring and troubleshooting management access
(b) Implement network services
(c) Performing maintenance operations
6
Configure and Troubleshoot WLAN Services
6.01
Voice for autonomous deployments
(a) RF Design considerations
(b) Implement the network infrastructure to support Voice over Wireless
(c) General configuration settings
(d) Security settings
(e) CAC
(f) Audit Voice deployments
6.02
Voice for unified deployments
(a) RF Design considerations
(b) Implement the network infrastructure to support Voice over Wireless
(c) General configuration settings
(d) Security settings
(e) CAC
(f) Audit Voice deployments
6.03
Video
(a) RF Design considerations
(b) Implement the network infrastructure to support Video over Wireless
(c) General configuration settings
(d) CAC
6.04
Context aware services
(a) RF Design Considerations
(b) Location

CCIE Security Topics

Videos in Bold Font and Marked with * are Available Now

Understanding & Interpreting the ARP Header Structure*
Understanding & Interpreting the HTTP Header Structure*
Understanding & Interpreting the ICMP Header Structure*
Understanding & Interpreting the TCP Header Structure*
Understanding & Interpreting the IP Header Structure*
Implementing Secure Networks Using Cisco ASA Firewalls
Configuring and Troubleshooting Cisco ASA Firewalls
Initializing the Basic Cisco ASA Firewall (IP Address, Mask, Default Route, etc.)
Understanding Security Levels (Same Security Interface)
Understanding Single vs. Multimode
Understanding Firewall vs. Transparent Mode
Understanding Multiple Security Contexts
Understanding Shared Resources for Multiple Contexts
Understanding Packet Classification in Multiple-Contexts Mode
VLAN Subinterfaces Using 802.1Q Trunking
Multiple-Mode Firewall with Outside Access
Single-Mode Firewall Using the Same Security Level
Multiple-Mode, Transparent Firewall
Single-Mode, Transparent Firewall with NAT
ACLs in Transparent Firewall (for Pass-Through Traffic)
Understanding How Routing Behaves on the Adaptive
Security Appliance (Egress and Next-Hop Selection Process)
Understanding Static vs. Dynamic Routing
Static Routes
RIP with Authentication
OSPF with Authentication
EIGRP with Authentication
Managing Multiple Routing Instances
Redistribution Between Protocols
Route Summarization
Route Filtering
Static Route Tracking Using an SLA
Dual ISP Support Using Static Route Tracking
Redundant Interface Pair
LAN-Based Active/Standby Failover (Routed Mode)
LAN-Based Active/Active Failover (Routed Mode)
LAN-Based Active/Standby Failover (Transparent Mode)
LAN-Based Active/Active Failover (Transparent Mode)
Stateful Failover Link
Device Access Management
Enabling Telnet
Enabling SSH
The nat-control Command vs. no nat-control Command
Enabling Address Translation (NAT, Global, and Static)
Dynamic NAT
Dynamic PAT
Static NAT
Static PAT
Policy NAT
Destination NAT
Bypassing NAT When NAT Control Is Enabled Using
Identity NAT
Bypassing NAT When NAT Control Is Enabled Using NAT Exemption
Port Redirection Using NAT
Tuning Default Connection Limits and Timeouts
Basic Interface Access Lists and Access Group (Inbound and Outbound)
Time-Based Access Lists
ICMP Commands
Enabling Syslog and Parameters
NTP with Authentication
Object Groups (Network, Protocol, ICMP, and Services)
Nested Object Groups
URL Filtering
Java Filtering
ActiveX Filtering
ARP Inspection
Modular Policy Framework (MPF)
Application-Aware Inspection
Identifying Injected Errors in Troubleshooting Scenarios
Understanding and Interpreting Adaptive Security Appliance show and debug Outputs
Understanding and Interpreting the packet-tracer and capture Commands
Implementing Secure Networks Using Cisco IOS Firewalls Configuring and Troubleshooting Cisco IOS Firewalls
Zone-Based Policy Firewall Using Multiple-Zone Scenarios
Transparent Cisco IOS Firewall (Layer 2)
Context-Based Access Control (CBAC)
Proxy Authentication (Auth Proxy) Port-to-Application Mapping (PAM) Usage with ACLs
Use of PAM to Change System Default Ports
PAM Custom Ports for Specific Applications
Mapping Nonstandard Ports to Standard Applications
Performance Tuning
Tuning Half-Open Connections
Understanding and Interpreting the show ip port-map Commands
Understanding and Interpreting the show ip inspect Commands
Understanding and Interpreting the debug ip inspect Commands
Understanding and Interpreting the show zone|zone-pair Commands
Understanding and Interpreting the debug zone Commands
Implementing Secure Networks Using Cisco VPN Solutions Configuring and Troubleshooting Cisco VPN Solutions
Understanding Cryptographic Protocols (ISAKMP, IKE, ESP, Authentication Header, CA)
IPsec VPN Architecture on Cisco IOS Software and Cisco ASA Security Appliance
Configuring VPNs Using ISAKMP Profiles
Configuring VPNs Using IPsec Profiles
GRE over IPsec Using IPsec Profiles
Router-to-Router Site-to-Site IPsec Using the Classical Command Set (Using Preshared Keys and Certificates)
Router-to-Router Site-to-Site IPsec Using the New VTI Command Set (Using Preshared Keys and Certificates)
Router-to-ASA Site-to-Site IPsec (Using Preshared Keys and Certificates)
Understanding DMVPN architecture (NHRP, mGRE, IPsec, Routing)
DMVPN Using NHRP and mGRE (Hub-and-Spoke)
DMVPN Using NHRP and mGRE (Full-Mesh)
DMVPN Through Firewalls and NAT Devices
Understanding GET VPN Architecture (GDOI, Key Server, Group Member,Header Preservation, Policy, Rekey, KEK, TEK, and COOP)
Implementing GET VPN (Using Preshared Keys and Certificates)
GET VPN Unicast Rekey
GET VPN Multicast Rekey
GET VPN Group Member Authorization List
GET VPN Key Server Redundancy
GET VPN Through Firewalls and NAT Devices
Integrating GET VPN with a DMVPN Solution
Basic VRF-Aware IPsec
Enabling the CA (PKI) Server (on the Router and Cisco ASA Security Appliance)
CA Enrollment Process on a Router Client
CA Enrollment Process on a Cisco ASA Security Appliance Client
CA Enrollment Process on a PC Client
Clientless SSL VPN (Cisco IOS WebVPN) on the Cisco ASA Security Appliance (URLs)
AnyConnect VPN Client on Cisco IOS Software
AnyConnect VPN Client on the Cisco ASA Security Appliance
Remote Access Using a Traditional Cisco VPN Client – on a Cisco IOS Router
Remote Access Using a Traditional Cisco VPN Client – on a Cisco ASA Security Appliance
Cisco Easy VPN – Router Server and Router Client (Using DVTI)
Cisco Easy VPN – Router Server and Router Client (Using Classical Style)
Cisco Easy VPN – Cisco ASA Server and Router Client
Cisco Easy VPN Remote Connection Modes (Client, Network, Network+)
Enabling Extended Authentication (XAUTH) on Cisco IOS Software and the Cisco ASA Security Appliance
Enabling Split Tunneling on Cisco IOS Software and the Cisco ASA Security Appliance
Enabling Reverse Route Injection (RRI) on Cisco IOS Software and the Cisco ASA Security Appliance
Enabling NAT-T on Cisco IOS Software and the Cisco ASA Security Appliance
High-Availability Stateful Failover for IPsec with Stateful Switchover (SSO) and Hot Standby Router Protocol (HSRP)
High Availability Using Link Resiliency (with Loopback Interface for Peering)
High Availability Using HSRP and RRI
High Availability Using IPsec Backup Peers
High Availability Using GRE over IPsec (Dynamic Routing)
Basic QoS Features for VPN Traffic on Cisco IOS Software and the Cisco ASA Security Appliance
Identifying Injected Errors in Troubleshooting Scenarios (for Site-to-Site, DMVPN, GET VPN, and Cisco Easy VPN)
Understanding and Interpreting the show crypto Commands
Understanding and Interpreting the debug crypto Commands
Configuring Cisco IPS to Mitigate Network Threats Configuring and Troubleshooting Cisco IPS
Understanding Cisco IPS System Architecture (System Design, MainApp, SensorApp, EventStore)
Understanding Cisco IPS User Roles (Administrator, Operator, Viewer,Service)
Understanding Cisco IPS Command Modes (Privileged, Global, Service, Multi-Instance)
Understanding Cisco IPS Interfaces (Command and Control, Sensing,Alternate TCP Reset)
Understanding Promiscuous (IDS) vs. Inline (IPS) Monitoring
Initialization Basic Sensor (IP Address, Mask, Default Route, etc.)
Troubleshooting Basic Connectivity Issues
Managing Sensor ACLs
Allowing Services Ping and Telnet from/to Cisco IPS
Enabling Physical Interfaces
Promiscuous Mode
Inline Interface Mode
Inline VLAN Pair Mode
VLAN Group Mode
Inline Bypass Mode
Interface Notifications
Understanding the Analysis Engine
Creating Multiple Security Policies and Applying Them to Individual Virtual Sensors
Understanding and Configuring Virtual Sensors (vs0, vs1)
Assigning Interfaces to the Virtual Sensor
Understanding and Configuring Event Action Rules (rules0, rules1)
Understanding and Configuring Signatures (sig0, sig1)
Adding Signatures to Multiple Virtual Sensors
Understanding and Configuring Anomaly Detection (ad0, ad1)
Using the Cisco IDM (IPS Device Manager)
Using Cisco IDM Event Monitoring
Displaying Events Triggered Using the Cisco IPS Console
Troubleshooting Events Not Triggering
Displaying and Capturing Live Traffic on the Cisco IPS Console (Packet Display and Packet Capture)
SPAN and RSPAN
Rate Limiting
Configuring Event Action Variables
Target Value Ratings
Event Action Overrides
Event Action Filters
Configuring General Settings
General Signature Parameters
Alert Frequency
Alert Severity
Event Counter
Signature Fidelity Rating
Signature Status
Assigning Actions to Signatures
AIC Signatures
IP Fragment Reassembly
TCP Stream Reassembly
IP Logging
Configuring SNMP
Signature Tuning (Severity Levels, Throttle Parameters, Event Actions)
Creating Custom Signatures (Using the CLI and Cisco IDM)
Understanding Various Types of Signature Engines
Understanding Various Types of Signature Variables
Understanding Various Types of Event Actions
Understanding New Cisco IPS 6.0 Features (e.g., Deny Packets for High-Risk Events by Default)
Creating a Custom String TCP Signature
Creating a Custom Flood Engine Signature
Creating a Custom AIC MIME-Type Engine Signature
Creating a Custom Service HTTP Signature
Creating a Custom Service FTP Signature
Creating a Custom ATOMIC.ARP Engine Signature
Creating a Custom ATOMIC.IP Engine Signature
Creating a Custom TCP Sweep Signature
Creating a Custom ICMP Sweep Signature
Creating a Custom Trojan Engine Signature
Enabling Shunning and Blocking (Enabling Blocking Properties)
Shunning on a Router
Shunning on the Cisco ASA Security Appliance
Enabling the TCP Reset Function
Cisco IOS IPS on a Router Using Version 5.x Format Signatures
Loading a Version 5.x Signature File onto the Router
Understanding the Signature Engines for Cisco IOS IPS
Transparent Cisco IOS IPS
Implementing Identity Management Configuring and Troubleshooting Identity Management
Understanding the AAA Framework
Understanding the RADIUS Protocol
Understanding RADIUS Attributes (Cisco AV-PAIRS)
Understanding the TACACS+ Protocol
Understanding TACACS+ Attributes
Comparison of RADIUS and TACACS+
Configuring Basic LDAP Support
Overview of Cisco Secure ACS
How to Navigate Cisco Secure ACS
Cisco Secure ACS – Network Settings Parameters
Cisco Secure ACS – User Settings Parameters
Cisco Secure ACS – Group Settings Parameters
Cisco Secure ACS – Shared Profiles Components (802.1X, NAF, NAR, Command Author, Downloadable ACL, etc.)
Cisco Secure ACS – Shell Command Authorization Sets Using Both Per-GroupSetup and Shared Profiles Cisco Secure ACS – System Configuration Parameters
Cisco Secure ACS – Posture Validation Policies for NAC Setup
Cisco Secure ACS – Using Network Access Profiles (NAPs)
Cisco Secure ACS – MAC Authentication Bypass (MAB) Using NAP
Enabling AAA on a Router for vty Lines
Enabling AAA on a Switch for vty Lines
Enabling AAA on a Router for HTTP
Enabling AAA on the Cisco ASA Security Appliance for Telnet and SSH Protocols
Using Default vs. Named Method Lists
Complex Command Authorization and Privilege Levels, and Relevant Cisco Secure ACS Profiles
Proxy Service Authentication and Authorization on the Cisco ASA Security Appliance for Pass-Through Traffic (FTP, Telnet, and HTTP), and Relevant Cisco Secure ACS Profiles
Using Virtual Telnet on the Cisco ASA Security Appliance
Using Virtual HTTP on the Cisco ASA Security Appliance
Downloadable ACLs
AAA 802.1X Authentication Using RADIUS on a Switch
NAC-L2-802.1X on a Switch
NAC-L2-IP on a Switch
Troubleshooting Failed AAA Authentication or Authorization
Troubleshooting Using Cisco Secure ACS Logs
Using the test aaa Command on the Router, Switch, or Cisco ASA Security Appliance
Understanding and Interpreting the debug radius Command
Understanding and Interpreting the debug tacacs+ Command
Understanding and Interpreting the debug aaaauthentication Command
Understanding and Interpreting the debug aaa authorization Command
Understanding and Interpreting the debug aaa accounting Command
Implementing Control Plane and Management Plane Security Configuring and Troubleshooting Router Traffic Plane Security
Understanding Four Types of Traffic Planes on a Cisco Router (Control, Management, Data, and Services)
Understanding Control Plane Security Technologies and Core Concepts Covering Security Features Available to Protect the Control Plane
Understanding Management Plane Security Technologies and Core Concepts Covering Security Features Available to Protect the Management Plane
Configuring Control Plane Policing (CoPP)
Control Plane Rate Limiting
Disabling Unused Control Plane Services (IP Source Routing, Proxy ARP, Gratuitous ARP, etc.)
Disabling Unused Management Plane Services (Finger, BOOTP, DHCP, Cisco Discovery Protocol, etc.)
MPP (Management Plane Protection) and Understanding OOB (Out-of-Band)Management Interfaces
Configuring Protocol Authentication
Route Filtering and Protocol-Specific Filters
ICMP Techniques to Reduce the Risk of ICMP-Related DoS Attacks (IP Unreachable, IP Redirect, IP Mask Reply, etc.)
Selective Packet Discard (SPD)
MQC and FPM Types of Service Policy on the CoPP Interface
Broadcast Control on a Switch
Catalyst Switch Port Security
Cisco IOS Software-Based CPU Protection Mechanisms (Options Drop, Logging Interval, CPU Threshold)
The Generalized TTL Security Mechanism Known as “BGP TTL Security Hack”(BTSH)
Device Access Control (vty ACL, HTTP ACL, SSH
Access, Privilege Levels)
SNMP Security
System Banners
Secure Cisco IOS File Systems
Understanding and Enabling Syslog
NTP with Authentication
Role-Based CLI Views and Cisco Secure ACS Setup
Service Authentication on Cisco IOS Software (FTP, Telnet, HTTP)
Network Telemetry Identification and Classification of Security Events (IP Traffic Flow, NetFlow, SNMP, Syslog, RMON)
Configuring Advanced Security Configuring and Troubleshooting Advanced Security Features
Implementing RFC 1918 Antispoofing Filtering
Implementing RFC 2827 Antispoofing Filtering
Implementing RFC 2401 Antispoofing Filtering
Marking Packets Using DSCP and IP Precedence and Other Values
Unicast RPF (uRPF) With or Without an ACL (Strict and Loose Mode)
RTBH Filtering (Remote Triggered Black Hole)
Basic Traffic Filtering Using Access Lists: SYN Flags, Established, etc. (Named vs. Numbered ACLs)
Managing Time-Based Access Lists
Enabling NAT and PAT on a Router
Conditional NAT on a Router
Multihome NAT on a Router
Enabling a TCP Intercept on a Router
Enabling a TCP Intercept on the Cisco ASA Security Appliance
FPM (Flexible Packet Matching) and Protocol Header Definition File (PHDF) Files and Configuration of Nested Policy Maps
CAR Rate Limiting with Traffic Classification Using ACLs
PBR (Policy-Based Routing) and Use of Route Maps
Advanced MQC (Modular QoS CLI) on a Router
Advanced Modular Policy Framework (MPF) on the Cisco ASA Security Appliance
Classification Using NBAR
Understanding and Enabling NetFlow on a Router
Traffic Policing on a Router
Port Security on a Switch
Storm Control on a Switch
Private VLAN (PVLAN) on a Switch
Port Blocking on a Switch
Port ACL on a Switch
MAC ACL on a Switch
VLAN ACL on a Switch
Spanning Tree Protocol (STP) Protection Using BPDU Guard and Loop Guard on a Switch
DHCP Snooping on a Switch
IP Source Guard on a Switch
Dynamic ARP Inspection (DAI) on a Switch
Disabling DTP on All Nontrunking Access Ports 8.0 Identifying and Mitigating Network Attacks Configuring and Troubleshooting Network Attacks Note: This section uses the same products and technologies discussed in all the previous sections above particularly the “Configuring Advanced Security” section, but with greater focus and emphasis on reactive measures and attack mitigation
Concept of Proactive vs. Reactive Measures
Knowledge of Protocols: TCP, UDP, HTTP, SMTP, ICMP, FTP
Knowledge of Common Attacks: Network Reconnaissance, IP Spoofing, DHCP Snooping, DNS Spoofing, MAC Spoofing, ARP Snooping, Fragment Attack, Smurf Attack, TCP SYN Attack
Understanding and Interpreting ARP Header Structure
Understanding and Interpreting IP Header Structure
Understanding and Interpreting TCP Header Structure
Understanding and Interpreting UDP Header Structure
Understanding and Interpreting HTTP Header Structure
Understanding and Interpreting ICMP Header structure
Understanding and Interpreting ICMP Type Name and Codes
Understanding and Interpreting Syslog Messages
Understanding and Interpreting Packet Capture Outputs (Sniffer, Ethereal, Wireshark, TCPDump)
Understanding Different Types of Attack Vectors
Interpreting Various show and debug Outputs
Traffic Characterization
Packet Classification
Packet-Marking Techniques
Classifying Attack Patterns Using FPM
Memorizing Common Protocol and Port Numbers
Preventing an ICMP Attack Using ACLs
Preventing an ICMP Attack Using NBAR
Preventing an ICMP Attack Using Policing
Preventing an ICMP Attack Using the Modular Policy Framework (MPF) on the Cisco ASA Security Appliance
Preventing a SYN Attack Using ACLs
Preventing a SYN Attack Using NBAR
Preventing a SYN Attack Using Policing
Preventing a SYN Attack Using CBAC
Preventing a SYN Attack Using CAR
Preventing a SYN Attack Using a TCP Intercept
Preventing a SYN Attack Using the Modular Policy Framework (MPF) on the Cisco ASA Security Appliance
Preventing Application Protocol–Specific Attacks Using FPM (e.g., HTTP, SMTP)
Preventing Application Protocol–Specific Attacks Using NBAR (e.g., HTTP, SMTP)
Preventing Application Protocol–Specific Attacks Using the Modular Policy Framework (MPF) on the Cisco ASA Security Appliance (e.g., HTTP, SMTP)
Preventing IP Spoofing Attacks Using Antispoofing ACLs
Preventing IP Spoofing Attacks Using uRPF
Preventing IP Spoofing Attacks Using IP Source Guard
Preventing Fragment Attacks Using ACLs
Preventing MAC Spoofing Attacks Using Port Security
Preventing ARP Spoofing Attacks Using DAI
Preventing VLAN Hopping Attacks Using the switchport mode access Command
Preventing STP Attacks Using the Root Guard or BPDU Guard
Preventing DHCP Spoofing Attacks Using Port Security
Preventing DHCP Spoofing Attacks Using DAI
Preventing Port Redirection Attacks Using ACLs

CCNP R&S Topics

Videos in Bold Font and Marked with * are Available Now

ROUTE

Network Design Models
SONA and IIN
Understanding Routing Protocols
Building the Routing Table
Choosing a Route
Planning a Routing Implementation
EIGRP Overview
EIGRP Messages
EIGRP Route Selection
Planning an EIGRP Implementation
Basic EIGRP Configuration
Creating an EIGRP Default Route
Verify and Troubleshoot EIGRP
EIGRP Across a WAN
Customizing the EIGRP Configuration
Load Balancing
EIGRP Authentication
EIGRP Scalability
OSPF Overview
Link State Advertisements (LSA)
LSA Types
OSPF Operation
Planning for OSPF
Basic OSPF Configuration
Router ID
Verify and Troubleshoot OSPF
OSPF Network Types
Advanced OSPF Configuration
Controlling Routing Updates
Using Multiple Routing Protocols
Seed Metric
Administrative Distance
Using Offset-lists
Using IOS IP SLA
Policy-Based Routing
OER and VRF
Planning an Internet Connection
BGP Overview
Configuring BGP
BGP Path Selection
Filtering BGP Routes
BGP Authentication
Verifying BGP
Branch Office Design Considerations
Implementing Branch Offices
Components of a Mobile Worker Solution
Implementing a Mobile Worker Solution
IPv6 Addressing
IPv6 Routing
Integrating IPv4 and IPv6
IPv6 Link Types
IPsec Headers
IPsec Modes
Authentication Methods
Encryption Methods
Key Management
Establishing an IPsec VPN
Configuring a Site-to-Site VPN Using IOS
Monitoring and Troubleshooting IPsec VPNs
Using GRE with IPsec
Configuring a GRE Tunnel Using IOS

SWITCH

The Hierarchical Design Model
Core Layer
Service-Oriented Network Architecture
Planning a Network Implementation
VLAN Overview
VLAN Trunking
VLAN Trunking Protocol
EtherChannels
Verifying an EtherChannel
Troubleshooting VLAN Issues
Understanding the Spanning Tree Protocol
Rapid Spanning Tree
Multiple Spanning Tree
Spanning Tree Stability Mechanisms
Troubleshooting STP
Identifying a Bridging Loop
Spanning-Tree Best Practices
InterVLAN Routing Using an External Router
InterVLAN Routing Using Multilayer Switches
Components of High Availability
Resiliency and High Availability
Optimizing Redundancy
Network Management for High Availability
Hot Standby Router Protocol
Virtual Router Redundancy Protocol
GLBP
MAC Address-Based Attacks
VLAN-Based Attacks
Spoof Attacks
Securing Your Switch
VoIP in a Campus Network
Preparing the Network for VoIP
Voice VLANs
QoS for VoIP
Configuring VoIP Support on a Switch
Video over IP
QoS Requirements for Video
Cisco Unified Wireless Network
Characteristics of Wireless LANs
Cisco Wireless Network Components
Integrating Wireless into the LAN

TSHOOT

Principles
Structured Troubleshooting
The Troubleshooting Method
Integrating Troubleshooting into Maintenance
IOS Filtering Tools
Output Redirection
IOS Troubleshooting Tools
Hardware Diagnostics
Spanning Tree
VLANs
Switched Virtual Interfaces and InterVLAN routing
First-Hop Redundancy
Network Layer Connectivity
Routing Protocols
EIGRP
OSPF
BGP
Router Performance
Troubleshooting Security Features

CCNP Voice Topics

Videos in Bold Font and Marked with * are Available Now

CUCM: Single-Site Deployment
Multisite WAN with Centralized Call Processing
Multisite Deployment with Distributed Call Processing
Clustering over the IP WAN
CUCM Call-Processing Redundancy
CUCM Initial Configuration
Network and Feature Services
CUCM User Accounts
Bulk Administration Tool Overview
Managing User Accounts Using Cisco Unified Communications Manager BAT
Lightweight Directory Access Protocol (LDAP) Overview and Considerations
CUCM Endpoints
Cisco IP Phones: Boot Sequence
H.323 Endpoint Support
SIP Third-Party IP Phone Support in CUCM
Cisco LAN Switches
Endpoint Configuration Tools and Elements Overview
Endpoint Basic Configuration Elements
Device Settings
Phone Configuration Element Relationship
Phone Auto-registration
Bulk Administration Tool and Auto-Register Phone Tool
Manual Configuration
Analog and Digital Gateways
Core Gateway Requirements
Gateway Communication Overview
MGCP Gateway Implementation
MGCP Configuration Server
H.323 Gateway Implementation
SIP Gateway Implementation
Dial Plan Components
Endpoint Addressing
Uniform On-Net Dial Plan Example
E.164 Overview
Call-Routing Overview
Digit Forwarding
Special Call-Routing Features
CUCM Path Selection
Partitions and Calling Search Spaces
Configuring Partitions and Calling Search Spaces
Time-of-Day Call Routing
Client Matter Codes and Forced Authorization Codes
Class of Service Approaches
Emergency Call Routing and Vanity Numbers
Private Line Automatic Ringdown
CUCM Digit Manipulation
External Phone Number Mask
Translation Patterns
Transformation Masks
CUCM Digit Prefix and Stripping
Significant Digits
Cisco Unified Communications Manager Global Transformations
Transformation Examples
Calling Privileges
Call Coverage
Call-Hunting Components and Processes
Call-Hunting Options and Distribution Algorithms
Call-Hunting Flow
Call-Hunting Configuration
Call-Forwarding Features
Media Resources
Media Resource Support
Conferencing
Music on Hold
Annunciator
Media Resource Access Control
Cisco IP Phone Services
Cisco IP Phone Services Configuration
Cisco IP Phone Services Subscriptions
How Presence Works with CUCM
Presence Support in CUCM
Presence Configuration
Presence Access Control
Presence Policy Configuration
Cisco Unified Mobility Overview
Mobile Connect Call Flow: Internal Calls Placed from Remote Phone
Shared Line Between Phone and Remote Destination Profile
Cisco Unified Mobility Configuration
Cisco Unified Mobility: MVA Configuration Procedure
Examining Multisite Connection Options
MGCP Gateway Implementation Review
H.323 Gateway Implementation
Trunk Implementation Overview
CUCM Gatekeeper-Controlled ICT and H.225 Trunk Configuration
Multisite Dial Plan Overview
Dial Plan Requirements for Multisite Deployments with Distributed Call Processing
Implementing PSTN Access in Cisco IOS Gateways
Implementing Selective PSTN Breakout
Implementing PSTN Backup for On-Net Intersite Calls
Implementing TEHO
TEHO Example Without Local Route Groups
TEHO Example with Local Route Groups
Implementing Globalized Call Routing
Globalized Call Routing: Number Formats
Localized Call Egress at Phones
Globalized Call-Routing Example: Emergency Dialing
Considering Globalized Call-Routing Interdependencies
Remote-Site Redundancy Overview
Remote-Site Redundancy Technologies
MGCP Fallback Usage
Basic Cisco Unified SRST Usage
Cisco Unified SRST Versions and Feature Support
Plus (+) Prefix and E.164 Support in Cisco Unified SRST
Support for Multiple MOH Sources
MGCP Fallback and SRST Configuration
Cisco Unified SRST Configuration in CUCM
SRST Configuration on the Cisco IOS Gateway
MGCP-Gateway-Fallback Configuration on the Cisco IOS Gateway
Dial Plan Configuration for SRST Support in CUCM
SRST Dial Plan of CFUR and CSS
SRST Dial Plan: Max Forward UnRegistered Hops to DN
MGCP Fallback and SRST Dial Plan Configuration in the Cisco IOS Gateway
SRST Dial Plan Components for Normal Mode Analogy
Cisco Unified SRST Dial Plan Dial Peer Commands
SRST Dial Plan Commands: Open Numbering Plans
SRST Dial Plan Voice Translation-Profile Commands for Digit Manipulation
SRST Dial Plan Class of Restriction Commands
CUCME Overview
CUCME Features
General Configuration of CUCME
Configuring CUCME in SRST Mode
Phone-Provisioning Options
Advantages of CUCME SRST
Phone Registration Process
Configuring CUCME for SRST
Bandwidth Management Overview
CUCM Codec Configuration
Local Conference Bridge Implementation
Transcoder Implementation
Multicast MOH from Remote Site Router Flash Implementation
CAC Overview
CAC in CUCM
Standard Locations
Issues with Devices Roaming Between Sites
Device Mobility Overview
Device Mobility Configuration Elements
Device Mobility Operation
Device Mobility Interaction with Globalized Call Routing
Device Mobility Configuration
Issues with Users Roaming Between Sites
CUCM Extension Mobility Overview
CUCM Extension Mobility Configuration Elements
CUCM Extension Mobility Operation
Default Device Profile and Feature Safe
CUCM Extension Mobility Configuration
SAF and CCD Overview
SAF Characteristics
SAF Client Types
SAF Message Components
SAF Routing Characteristics
SAF Neighbor Relationships
SAF Client and SAF Forwarder Functions
CCD Characteristics
CCD Services in CUCM
CCD Operation