iPexpert's Cisco CCIE R&S (v4) Lab Preparation Audio on Demand
 

Home

Guarantee

Support

Sample
iPexpert's Cisco CCIE R&S (v4) Lab Preparation Audio on Demand

iPexpert's CCIE R&S Lab Preparation Audio on Demand Technology Lecture Series is designed for CCIE Routing and Switching candidates who wish to learn about the protocols and technologies included in the lab exam blueprint in the comfort of their own home or office, or while driving to work.

$ 299 00
 
 

iPexpert's Cisco CCIE R&S (v4) Lab Preparation Audio on Demand

Recorded in high quality MP3 audio format, these lectures are available immediately for download. Clients will then be able to listen to them from any computer or MP3 player. The Audio On Demand lecture series is nearly 25 hours of detailed lectures that explain the fundamentals and implementations of the challenging protocols tested on the CCIE R&S lab exam. that will allow clients to continue to learn even when “on the go”.

Table of Contents

The topics, technologies, and protocols that are currently included in iPexpert's CCIE R&S audio on demand course:

Module 1: Strategy

  • Introduction and overall strategy
  • Open Ended Questions
  • Troubleshooting Section
  • Configuration Section

Module 2: Layer 2 Technologies

  • Implement Spanning-tree Protocol
  • Implement Trunks, VLANs and VTP
  • Implement EtherChannel and Load Balancing
  • Implement Ethernet Technologies
  • Implement SPAN, RSPAN and Flow Control 10 Implement Frame Relay
  • Implement HDLC and PPP

Module 3: IPv4

  • IPv4 Addressing and Subnetting
  • Implement Tunneling and GRE
  • Implement IPv4 RIPv2
  • Implement IPv4 OSPF
  • Implement IPv4 EIGRP
  • Implement IPv4 BGP
  • Implement Policy Routing
  • Implement PfR and OER
  • Implement Advanced Features

Module 4: IPv6

  • Implement IPv6 Addressing
  • Implement IPv6 Neighbor Discovery and Basic IPv6 Functionality Protocols
  • Implement Tunneling Techniques
  • Implement OSPFv3 and EIGRPv6
  • Implement Filtering and Redistribution

Module 5: MPLS Layer 3 VPNs

  • Implement MPLS
  • Implement L3VPNs on PE, P and CE Routers
  • Implement VRFs and VRF-Lite

Module 6: IP Multicast

  • Implement PIM Sparse Mode
  • Implement AutoRP, RP and BSR
  • Implement MSDP
  • Implement Interdomain Multicast Routing
  • Implement Multicast Tools, Features and SSM
  • Implement IPv6 Multicast, PIM and MLD

Module 7: Network Security

  • Implement Access Lists
  • Implement Zone Based Firewall
  • Implement uRPF
  • Implement IP Source Guard
  • Implement AAA
  • Implement Control Plane Policing
  • Implement 802.1x
  • Implement NAT

Module 8: Network Services

  • Implement HSRP, VRRP and GLBP
  • Implement NTP
  • Implement DHCP
  • Implement WCCP

Module 9: Quality of Service

  • Implement Modular QoS CLI (MQC)
  • Implement L2 QoS, SRR and policies
  • Implement RSVP
  • Implement Cisco AutoQoS

Module 10: Optimize the Network

  • Implement Syslog, Local Logging, SNMP and RMON
  • Implement IP SLA
  • Implement NetFlow
  • Implement SPAN, RSPAN and RITE
  • Implement EEM
  • Implement FTP, TFTP, SCP, HTTP, HTTPS, SSH and Telnet